Feedback on BMW Scanner 1.4.0

  • Click here to become an Official Member of BMW Club Malaysia Download Form
RoundconnectorE46.jpg


Its right infront of the driver side under the hood.... screw open the cap and you can see the 20 pin connector... if you do not have the adapter you need it ... it looks like this...

g_XKvh.jpg
 
Was the pic from your car ? I never see this connector from my engine bay ???
 
my car is the same as the picture will go down office now and take for you brother :p
 
aidilj;643342 said:
Thanks for the info. the bulb should be H1 not D2S, it is called Morimoto H1 for a reason. All HID have that ceramic return wire on their bulb. Those original Bosch ballast must cost a lot..

I don't know how to clear HID retrofit warning just yet. But should be doable through GT1.

Have you wired the solenoid of the bixenon yet?
Click to expand...

Ah ha.. Now I know why you are buying the scanner...
Capture_10-1.jpg
 
aidilj;643342 said:
Thanks for the info. the bulb should be H1 not D2S, it is called Morimoto H1 for a reason. All HID have that ceramic return wire on their bulb. Those original Bosch ballast must cost a lot..

I don't know how to clear HID retrofit warning just yet. But should be doable through GT1.

Have you wired the solenoid of the bixenon yet?
Click to expand...


Errr Bixenon solenoid is left untouched... cause im a bit worried to tap from the highlight ... any reference???

Sorry for all the errors cause im not that good on brands and specs, but like i said the HID bulbs are already inplace when i bought them... the Bosch Ballast i got second hand from ebay... the previous owner use a china one so i replaced it... better now no more flicker and such...

But i need the steps to program LCM/LCZ im not sure if its possible for 99/11 cars... what i heard is 2003 above only...

Also @Jarance bro i have different menu on LCM from BMW Scanner... i'll print screen it when im at home... Wow this thread become my personal diary... hope admin dont mind... sorry mods... it cant be helped it started as simple mods now become overall questions and answers... :p
 
Oh one more question for the floor... i cant use my headligh leveling conrol afer i kacau2 with LCM from Scanner 1.4... hurmmm i think need to off the automatic adaptation?
 
guys... changing the PWM value can fix the HID warning??? how to calculate for new numbers???
 
xcrave;643354 said:
Errr Bixenon solenoid is left untouched... cause im a bit worried to tap from the highlight ... any reference???

Sorry for all the errors cause im not that good on brands and specs, but like i said the HID bulbs are already inplace when i bought them... the Bosch Ballast i got second hand from ebay... the previous owner use a china one so i replaced it... better now no more flicker and such...

But i need the steps to program LCM/LCZ im not sure if its possible for 99/11 cars... what i heard is 2003 above only...

Also @Jarance bro i have different menu on LCM from BMW Scanner... i'll print screen it when im at home... Wow this thread become my personal diary... hope admin dont mind... sorry mods... it cant be helped it started as simple mods now become overall questions and answers... :p
Click to expand...

post picture of the LCM first.

So far all topic are technical..
 
Jarance i think those car got the 20 pin connector can read their live Data wy the 1.4.0 scanner, since Xcrave car was same spec wt mine and his car can read it through the 20 pin.
 
Alex5522;643357 said:
Bro untung lar u your car got this 20 pin connector install, mine one don't hv oh.. No wander your's can read d live data. Just post u my engine bay for ref :



View attachment 19404View attachment 19405
Click to expand...



Wah how come??? errrmmmm i think there is another way of doing it... buy the replacement and rewire it :p

I saw the diagram in realoem website... buy the module from potong shop also no matter i guess... maybe yours was dismantled try searching for the connector inside there maybe still got left behind then got chance to reinstall...
 
Alex5522;643363 said:
Jarance i think those car got the 20 pin connector can read their live Data wy the 1.4.0 scanner, since Xcrave car was same spec wt mine and his car can read it through the 20 pin.
Click to expand...

Not necessary. BMW have introduce the diagnostic as follows:- see the transition.

1. 10 or 12 pins - OBD-I compliant - oldest
2. 20 pins - OBD-I compliant
3. 20 pins - OBD-II compliant
4. 20 pins Plus 16 pins - OBD-II compliant
5. 16 pins - OBD-II compliant. - newest.

I still puzzle what is the port on the left side of the 16 pins connector.
Dconnector.jpg
 
Xcrave i did double checked my car & notice my 20 pin connector was taken out by previous owner from Jpn i guess, cause i can see the connector leg with screw tread was there :banghead:
 
jarance;643367 said:
Not necessary. BMW have introduce the diagnostic as follows:- see the transition.

1. 10 or 12 pins - OBD-I compliant - oldest
2. 20 pins - OBD-I compliant
3. 20 pins - OBD-II compliant
4. 20 pins Plus 16 pins - OBD-II compliant
5. 16 pins - OBD-II compliant. - newest.
Click to expand...

Jarance i have 16 pin under the dash (driver side) and another 20 pin in the engine bay... now this is the funny and frustrating part... from inside the under dash... i cannot get into other modules other than IKE... if using EDIABAS/INPA cable the same all need to go to 20 pin to do more?? how come??

Also GT1 do not detect connection yet... please help!!!
 
Alex5522;643368 said:
Xcrave i did double checked my car & notice my 20 pin connector was taken out by previous owner from Jpn i guess, cause i can see the connector leg with screw tread was there :banghead:
Click to expand...


Dame that person... well if you chance to be in nearby potong shop just get him to sell you the connector... ori price *gulp* so hope you get it under RM 200...

183.png
 
[Jarance i have 16 pin under the dash (driver side) and another 20 pin in the engine bay... now this is the funny and frustrating part... from inside the under dash... i cannot get into other modules other than IKE... if using EDIABAS/INPA cable the same all need to go to 20 pin to do more?? how come??

Also GT1 do not detect connection yet... please help!!!]



It seem this was the interesting Q to bro Jarance / Aidilj/ IanDaddy
 
xcrave;643370 said:
Jarance i have 16 pin under the dash (driver side) and another 20 pin in the engine bay... now this is the funny and frustrating part... from inside the under dash... i cannot get into other modules other than IKE... if using EDIABAS/INPA cable the same all need to go to 20 pin to do more?? how come??

Also GT1 do not detect connection yet... please help!!!
Click to expand...

Alex and xcrave, can you both post the software version of DME and EGS that is detected by the scanner 1.4?
 
jarance;643374 said:
Alex and xcrave, can you both post the software version of DME and EGS that is detected by the scanner 1.4?
Click to expand...


Bro sorry for the minor knowledge from me are u asking for this :

---------------------------------------------------------------------------------------------------------------------------
BMW Scanner v1.4.0.8 (07.07.2010) - P.A.Soft, 2010 HW: V144Bn9 Time: 6:48:05 PM 6/6/2011
---------------------------------------------------------------------------------------------------------------------------


# SCAN START
---------------------------------------------------------------------------------------------------------------------------
Unit BMWTNR HW SW-FSW CI DI BI/VI Date Odometer VIN ADFG Algorithm
---------------------------------------------------------------------------------------------------------------------------
EGS -> 1.423.886 29 57 00 10 60 23/00 172220 km WBAAM12090FN07842 000000 GS20
EWS -> 6.905.669 03 08 81 81 07 26/00 172224 km WBAAM12090FN07842 FFFFFF EWS3
ABS -> 6.751.767 06 33 04 69 60 29/60 - - 007842 ABS/ASC MK20 E36,E46
A/C -> 4.106.930 22 05 03 32 0A 28/00 - - 007842 IHKA E46 PU98/PU99
SRS -> 6.905.491 01 06 31 08 00 29/00 - FN07842 000000 MRS3 E46
IKE -> 6.906.899 10 20 04 52 11 27/00 172231 km FN07842 FFFFFF M35080 - E46 (E46)
LCM -> 6.907.947 10 20 29 20 00 28/00 172200 km FN07842 000000 HC11P2 - 3 (LSZ)
ZKE -> 6.907.659 11 16 02 40 10 28/00 - - 007842 ZKE5
MFL -> 0.000.000 01 10 00 03 78 00/00 - - - MFL2
RAD -> 6.902.711 48 49 00 13 09 20/00 - - - Radio ZIS/BM/MIR


# USER INFO FIELDS
---------------------------------------------------------------------------------------------------------------------------
Unit Date VIN Odometer Assembly Software Service Dealer Tester Program ver.
---------------------------------------------------------------------------------------------------------------------------
EGS -> 26.07.00 WBAAM12090FN07842 0 km 7.504.695 7.504.696 1.000.000 012321 42324 -
26.11.10 WBAAM12090FN07842 153000 km 7.504.695 7.504.696 1.000.000 000000 20000 -


# ERRORS IN UNITS
---------------------------------------------------------------------------------------------------------------------------
Unit BMWTNR HW SW-FSW ERRORS / SHADOW-MEMORY
---------------------------------------------------------------------------------------------------------------------------
EGS -> 1.423.886 29 57 no errors
EWS -> 6.905.669 03 08 1 error
ABS -> 6.751.767 06 33 no errors
A/C -> 4.106.930 22 05 no errors
SRS -> 6.905.491 01 06 no errors
IKE -> 6.906.899 10 20 no errors
LCM -> 6.907.947 10 20 no errors / no errors
ZKE -> 6.907.659 11 16 3 errors / no errors
MFL -> 0.000.000 01 10 no data
RAD -> 6.902.711 48 49 no errors


# ERRORS DETAILS - DTC(hex)/PARAM(hex)
---------------------------------------------------------------------------------------------------------------------------
EWS -> 03/3F - Toleration of changing code increased, key 0

ZKE -> 07/21 - Anti-theft alarm system: Siren, Radio interior protection, Tilt alarm sensor or Wire STDWA Short circuit to ground or Open circuit
41/21 - Anti-theft alarm system: Tilt alarm sensor
42/21 - Anti-theft alarm system: Interior protection
 
Alex5522;643389 said:
Bro sorry for the minor knowledge from me are u asking for this :

---------------------------------------------------------------------------------------------------------------------------
BMW Scanner v1.4.0.8 (07.07.2010) - P.A.Soft, 2010 HW: V144Bn9 Time: 6:48:05 PM 6/6/2011
---------------------------------------------------------------------------------------------------------------------------


# SCAN START
---------------------------------------------------------------------------------------------------------------------------
Unit BMWTNR HW SW-FSW CI DI BI/VI Date Odometer VIN ADFG Algorithm
---------------------------------------------------------------------------------------------------------------------------
EGS -> 1.423.886 29 57 00 10 60 23/00 172220 km WBAAM12090FN07842 000000 GS20
EWS -> 6.905.669 03 08 81 81 07 26/00 172224 km WBAAM12090FN07842 FFFFFF EWS3
ABS -> 6.751.767 06 33 04 69 60 29/60 - - 007842 ABS/ASC MK20 E36,E46
A/C -> 4.106.930 22 05 03 32 0A 28/00 - - 007842 IHKA E46 PU98/PU99
SRS -> 6.905.491 01 06 31 08 00 29/00 - FN07842 000000 MRS3 E46
IKE -> 6.906.899 10 20 04 52 11 27/00 172231 km FN07842 FFFFFF M35080 - E46 (E46)
LCM -> 6.907.947 10 20 29 20 00 28/00 172200 km FN07842 000000 HC11P2 - 3 (LSZ)
ZKE -> 6.907.659 11 16 02 40 10 28/00 - - 007842 ZKE5
MFL -> 0.000.000 01 10 00 03 78 00/00 - - - MFL2
RAD -> 6.902.711 48 49 00 13 09 20/00 - - - Radio ZIS/BM/MIR


# USER INFO FIELDS
---------------------------------------------------------------------------------------------------------------------------
Unit Date VIN Odometer Assembly Software Service Dealer Tester Program ver.
---------------------------------------------------------------------------------------------------------------------------
EGS -> 26.07.00 WBAAM12090FN07842 0 km 7.504.695 7.504.696 1.000.000 012321 42324 -
26.11.10 WBAAM12090FN07842 153000 km 7.504.695 7.504.696 1.000.000 000000 20000 -


# ERRORS IN UNITS
---------------------------------------------------------------------------------------------------------------------------
Unit BMWTNR HW SW-FSW ERRORS / SHADOW-MEMORY
---------------------------------------------------------------------------------------------------------------------------
EGS -> 1.423.886 29 57 no errors
EWS -> 6.905.669 03 08 1 error
ABS -> 6.751.767 06 33 no errors
A/C -> 4.106.930 22 05 no errors
SRS -> 6.905.491 01 06 no errors
IKE -> 6.906.899 10 20 no errors
LCM -> 6.907.947 10 20 no errors / no errors
ZKE -> 6.907.659 11 16 3 errors / no errors
MFL -> 0.000.000 01 10 no data
RAD -> 6.902.711 48 49 no errors


# ERRORS DETAILS - DTC(hex)/PARAM(hex)
---------------------------------------------------------------------------------------------------------------------------
EWS -> 03/3F - Toleration of changing code increased, key 0

ZKE -> 07/21 - Anti-theft alarm system: Siren, Radio interior protection, Tilt alarm sensor or Wire STDWA Short circuit to ground or Open circuit
41/21 - Anti-theft alarm system: Tilt alarm sensor
42/21 - Anti-theft alarm system: Interior protection
Click to expand...

yes that the text file when you first scan and it auto save by the program. how come you dont have the DME detected?

mine text is as follows:_

---------------------------------------------------------------------------------------------------------------------------
BMW Scanner v1.4.0.8 (07.07.2010) - P.A.Soft, 2010 HW: V144Bn9 Time: 10:12:42 AM 1/14/2011
---------------------------------------------------------------------------------------------------------------------------


# SCAN START
---------------------------------------------------------------------------------------------------------------------------
Unit BMWTNR HW SW-FSW CI DI BI/VI Date Odometer VIN ADFG Algorithm
---------------------------------------------------------------------------------------------------------------------------
DME -> 7.528.050 19 70 00 14 60 45/03 137450 km WBAJK3YYYY0000000 FFFFFF MS43.0 M54 (EWS3)
EGS -> 7.522.980 2H 20 00 11 60 45/03 138040 km WBAJK4YYYY0000000 000000 GS8.60.4 E38/39/46/85
EWS -> 6.905.666 03 08 81 81 07 43/03 138011 km WBA0000000ET79931 FFFFFF EWS3
ABS* -> 6.765.452 01 0.0.112 12 0006 0006 11.03 - EV35080ET79931 009931 DSC E46,R50,E85
LEW -> 6.760.232 04 04 01 30 60 38/03 - ET79931 009931 LWS5.1B
A/C -> 4.126.707 36 18 17 33 0E 47/03 - - 009931 IHKA E46 PU 03/2003
SRS -> 6.933.238 10 33 32 09 14 46/03 - ET79931 000000 MRS4
IKE -> 6.932.895 29 35 08 54 13 46/03 138047 km ET79931 FFFF00 M35080 - 2 (E46R)
LCM -> 6.936.826 24 36 35 30 14 47/03 138000 km ET79931 000000 HC912 - 4 (LSZ2)
ZKE -> 6.932.371 11 31 04 42 13 30/03 - - 029931 ZKE5
MFL -> 0.000.000 01 11 00 03 78 00/00 - - - MFL2
PDC -> 6.921.415 02 17 03 01 01 48/03 - - 019931 PDC E38/E39/E46/E53
AIC -> 6.923.954 40 32 02 10 00 45/03 - - 009931 RLS
SZM -> 6.925.500 03 04 20 20 78 40/03 - - - SZM E46


# USER INFO FIELDS
---------------------------------------------------------------------------------------------------------------------------
Unit Date VIN Odometer Assembly Software Service Dealer Tester Program ver.
---------------------------------------------------------------------------------------------------------------------------
DME -> 17.11.03 WBAJK3YYYY0000000 0 km 7.532.434 7.532.435 7.506.937 012321 42324 -
EGS -> 27.11.03 WBAJK4YYYY0000000 0 km 7.529.024 7.529.025 1.000.000 012321 42324 -
 

Similar threads

zidee
BMWlogger scan
Replies
0
Views
1K
zidee
zidee
jarance
  • Locked
GB for OBD-II Scanner - for E46/E39/E85/E83/E38
11 12 13
Replies
257
Views
18K
jarance
jarance
aidilj
NCS-Expert - Brief walkthrough and available parameters 2002 E46 318i CKD
2
Replies
39
Views
30K
TeD
TeD
Petrus
P0178 / P0179 Fuel Composition Sensor Circuit Low / High Input Fault Code
Replies
7
Views
1K
polaris78
P
Kim1980
How to do BMW coding with bmw scanner 1.4.0
Replies
8
Views
12K
sewell
sewell
aidilj
  • Sticky
EasyDIS 44 and INPA working
9 10 11
Replies
219
Views
49K
Joannebeila
J
saat
BMW iPod Interface Questions
Replies
12
Views
1K
saat
saat
J
BMW E46 SMG Coding with BMW ICOM WinKFP software
Replies
0
Views
3K
jankenda
J
Dave1987
DIY EasyCoding Hidden Function in iDrive
Replies
2
Views
3K
Kim1980
Kim1980
G
Why You Should Never Do "Engine Wash"
Replies
0
Views
803
Game-R
G
Top Bottom