1. Click here to become an Official Member of BMW Club Malaysia Download Form

Uncle aziz e38 00/03

Discussion in '7 Series' started by uncle aziz, Sep 18, 2010.

  1. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
    Hi kaniz ....I`m quiet lucky becos one of e38 forumer supplied me the AC panel....fitted to the car today and tested good operational. I hv not been billed yet but he indicated to me should not exceed RM 500. I hv been supplied with one key too. So need to get duplicate from KL ( was told around RM800)
    My e38 has gone through thorough inspection and undergoing complete refurbish work as to avoid inconveniences of having to visit workshop from time to time.
     
  2. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
    ....the meter panel is being "ringed".....no additional horse power is being created. ....will be completed in 4 days time. Every screw, nuts and wires inspected and touched. Wires in hot spot areas have been rewired....copper exposed....not happen in my 1997 e39!
    Think carefully before u decide to refurbish ....is not cheap...can buy brand new made in M`sia car ....unless u r real UDM enthu

    [​IMG]
     
  3. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
    Kaniz....I think I`ve seen yours in mudah/ motortrader .....upload photo pl...
     
  4. kaniz

    kaniz Club Guest

    Joined:
    Jul 4, 2006
    Messages:
    490
    Likes Received:
    0
    Uncle Aziz, will be getting the car in a week time. Once i get hold of the car, will upload the pics. And yes, it is the same car you mentioned.
     
  5. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
    Restoration work almost come to the end. Handing over will take place in 2 days time after CM of Bayern satisfy
    with his team job

    [​IMG]

    [​IMG]

    [​IMG]
     
  6. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
    Special thank to Yazmeen KL for the items supplied to make e38 back to its original state....

    Next project : 17/18 inches rims parallel 5 spoke/ any nice staggered rims
     
  7. clipguy

    clipguy Club Guest

    Joined:
    Apr 20, 2007
    Messages:
    28
    Likes Received:
    0
    indeed very yummy car :) more pics unker!
     
  8. YaZmEeN

    YaZmEeN Active Member
    Staff Member

    Joined:
    Jan 18, 2010
    Messages:
    1,312
    Likes Received:
    1
    Uncle,

    With 17 inch, the tyre that u can find to compensate with ur E38 size will be equal to X3 tyre size, which is very hard to find. That will be 235/55/17. My car was using Falken 912 with the E60 rim before.

    The best will be 18 or HIGHER...go for it and u'll stop looking at other people's car and said to urself, "i should have done this"

    :D
     
  9. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
    Agreed...has been searching hi and lo for 18 in rims in Pg/Bworth.
    The one seen in internet ( available in Japan) not surface here yet.
     
  10. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
  11. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
    hmmmmmnnnn.....I ve seen few e38 with Staggered M-Parallel, 18 inch
    18x8 inch 18x9.5 inch, 5x120mm 13mm/25mm
    Machined Face/Silver Window Wheels

    .....impressive look.
     
  12. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
    Finally after 25 days, a fully restored and properly done up e38 00/03 has been certified fit cruising on hi way......
     
  13. db8

    db8 Club Guest

    Joined:
    Jul 23, 2010
    Messages:
    166
    Likes Received:
    0
    we want pics...
     
  14. Eggie86

    Eggie86 Club Guest

    Joined:
    Feb 16, 2009
    Messages:
    7,281
    Likes Received:
    23
    Awesome bro! Can't wait to see the end result. :top:
     
  15. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
    Chief mechanic still don`t want to release to me.....told him to travel long distance to Kola Kangsar and back ...to check again for any leakages/ sensors failure and other weaknesess. To deliver by Saturday.
     
  16. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
    He he ....as usual...fotos will be updated once the interior / leather seat has gone through cleaning/polishing and waxing job.
     
  17. uncle aziz

    uncle aziz Club Guest

    Joined:
    Dec 3, 2006
    Messages:
    335
    Likes Received:
    31
  18. initialM

    initialM Official Member

    Joined:
    Jan 30, 2006
    Messages:
    8,592
    Likes Received:
    212
    Owns by Official member lar bro ssman
     
  19. YaZmEeN

    YaZmEeN Active Member
    Staff Member

    Joined:
    Jan 18, 2010
    Messages:
    1,312
    Likes Received:
    1
    Maybe our Bro IM would like to consider....? :D
     
  20. initialM

    initialM Official Member

    Joined:
    Jan 30, 2006
    Messages:
    8,592
    Likes Received:
    212

    i'm into v8 for E38:listen:
     

Share This Page