GB extractor for BMW 6 cylinders engine

[tamade7]

Refer to this post http://www.bmwclubmalaysia.com/forums/showthread.php?p=541482#post541482 for more info on the extractor.5 units - rm2200 each without installation10 units - rm2080 each without installationPlease state your name and car model.1)2)3)4)5)

 

[SilverBullet]

Let's get the ball rolling..:rock:

Refer to this post http://www.bmwclubmalaysia.com/forums/showthread.php?p=541482#post541482 for more info on the extractor.

5 units - rm2200 each without installation
10 units - rm2080 each without installation

Please state your name and car model.
1)SilverBullet - e46 330ci M54B30
2)
3)
4)
5)

 

[tamade7]

*Update*
Tim just opened a branch in Sunway. Call him 0172001336 and see if you can get the price without the GB.

 

[SilverBullet]

*Update*
Tim just opened a branch in Sunway. Call him 0172001336 and see if you can get the price without the GB.

Thanks bro. Will definitely give him a call to check if he's open tomorow. Any chance the branch is called "H Performance"?

Hopefully it has proper facilites, as I'm planning to carry out the installation there and also if budget permits, thinking of doing a full custom exhaust system

 

[Spaceman]

Thanks bro. Will definitely give him a call to check if he's open tomorow. Any chance the branch is called "H Performance"?

Hopefully it has proper facilites, as I'm planning to carry out the installation there and also if budget permits, thinking of doing a full custom exhaust system

Yo bro, i am looking at fabricating a custom exhaust for my E90 325i, preferably a Quad setup. If adding a header will help compensate the loss of low end punch from Quad setup, i'll be more willing to know more.

Do they provide custom exhaust fabrication service?

 

[tamade7]

Sunway branch open this Oct. They can custom make to your specification.

 

[SilverBullet]

here you go hakim :top:

fully customized quad exhaust system on a 330ci..from extractor till exhaust tip..

 

[hakim_radzuan]

here you go hakim :top:

fully customized quad exhaust system on a 330ci..from extractor till exhaust tip..

OMG! damn i like it so much..where did u do that? and how much afterall?

 

[loafer]

Doesn't a quad setup kill your low-end torque? Especially when your engine isn't mean to have a quad setup?

 

[SilverBullet]

design was based on this (Eisenmann Rear Muffler Quad Exhaust) :

basically to accomodate the spare tyre compartment and reduce heat from going to the battery & petrol tank..

we should meet up bro..u can listen to the cat-less-straight-piping 3.0L growl..if u want, u can also test drive the car just to get the feel..hehehe :top:

 

[SilverBullet]

Doesn't a quad setup kill your low-end torque? Especially when your engine isn't mean to have a quad setup?

that depends on how the system is set up bro..if done properly, it can actually improve your torque & hp, combined with high performance headers and cat-less system, you can gain by about 20-25hp..in my case, it caused my clutch to slip at 3rd gear when the rpm shoots up too fast

 

[hakim_radzuan]

design was based on this (Eisenmann Rear Muffler Quad Exhaust) :

basically to accomodate the spare tyre compartment and reduce heat from going to the battery & petrol tank..

we should meet up bro..u can listen to the cat-less-straight-piping 3.0L growl..if u want, u can also test drive the car just to get the feel..hehehe :top:

cat less? any check engine light after that? btw you custom made ur exhaust together with extractor or do it later? me on remus sport label now but after seing ur pic i was arhhhhh tempted...hahaha

 

[SilverBullet]

cat less? any check engine light after that? btw you custom made ur exhaust together with extractor or do it later? me on remus sport label now but after seing ur pic i was arhhhhh tempted...hahaha

yup cat-less..there's a way to do it in which was incorporated into the design itself..no issues with CEL at all :top:..yup i did mine together with the extractor..alang2 buat full system sekaligus..hehe..i personally like the sound tho..deep bassy at low rpms, but once u pass 3.5k the sound becomes sharp like a FI'ed car but at the exhaust instead..maybe placebo effect kut..

next step is to remap the ecu to optimise the exhaust upgrade..not sure should do now or wait first (s/c?)..:burnout:

 

[afifazhanee]

I can vouch for this, test drove silverbullet's car just now, no low end torque loss issue, pickup is very noticeable and the sound is very aggressive, but bearable.:top:

 

[hakim_radzuan]

yeah, the sound are perfect..not to loud, good!

 

[SilverBullet]

I can vouch for this, test drove silverbullet's car just now, no low end torque loss issue, pickup is very noticeable and the sound is very aggressive, but bearable.:top:

yeah, the sound are perfect..not to loud, good!

thanks bros..was pleasure meeting u guys..finally not only get to meet, but also had the rare opportunity to test drive the Red Devil and witness the beauty of the White Monster..hehehe..so bile nak pasang ni? i think we can find a way to integrate the custom quad with the remus box..sure bunyi lagi masyuk tu

 

[paultantk]

tempting. where was this done? is the shop who does this experienced in BMWs, can do without CELs and etc? and knows how to do proper pipe sizing? JFA and etc, nama saja ada, but damn crap.

 

[paultantk]

anyone? where's this shop?

 

[tamade7]

anyone? where's this shop?

Call Tim 0172001336 and ask for his location. I think it is somewhere Recaro.

 

[SilverBullet]

anyone? where's this shop?

hi Paul Tan..the shop is in Melaka called Martech..but he recently opened a branch in Sunway that does full custom exhausts and cat-less extractors with no CEL issues..you can contact the owner, a very nice chap Tim at 0172001336 and mention my name Wan 330ci..quite happy with his workmanship with TIG welding, good technical knowledge on what he's doing and has a lot of experience hooking-up bmw exhausts..just my opinion