guys/galsi brought up this topic in the former website but till now still unable to solve it.The left hand wiper still gives out the noise on its way back after its cycle.AB has already changed the whole blade.Any suggestions anyone?
without switching the wiper on, go out to the wiper arm and grab hold of the joint connecting the wiper to the motor. Try to see if you can move the whole motor. if you can, the entire housing may have come loose and need to tighten it. no need for parts if that is the case.
the wiper is not at 90' to the windshield,causing it to judder. get a vice grip and bend the whole arm till you get it right.then test and ensure the wiper blade change strokes in tandem with the wipe direction(like the strokes you make with the paintbrush when painting a wall)
call me 012 2290535. i maybe can help you but you have to meet me some where. my name is vincent here .call me
Stil figuring which way to bend it?????Tried but its still juddering.Maybe i m doing it the wrong way????????
Wiper judder is usually caused by impurities that have bonded itself to the windscreen's surface. Use some detailing clay or some spirit/alchohol and give it a thorough cleaning. Most times this should fix it.
