Say hello to Karl.... :)

[Iceduke]

Here's Karl... Getting nano coated...

Getting fogged...

All shiny and raring to go..

the rear...

In the background you can catch a glimpse of my trusty ol e34...

and some pics of the innards

All in all still stock but mods to follow...so keep the racuns coming guys

 

[Iceduke]

and some interior console fixer upper...followed this link to a tee....

http://forum.e46fanatics.com/showthread.php?t=753372

and voila...almost as good as new....

you can get the PlastiDip at Ace Hardware for RM 43.90. I used 3 grades of sand paper...100,400,1000, some scotch tape, blade and about 3-4 coats of the dip.....

all in less than RM 50...

 

[Fireuz]

Shining beast u've got there bro.. Mind to share how much you spent for the Nano Coated?? Hows the result?

 

[Iceduke]

Oh I got the groupon for RM130...which was recently advertised....the additional RM30 was for fogging...

checked, the groupon offer expired....non promo..coating is RM400...

 

[Fireuz]

Oh I got the groupon for RM130...which was recently advertised....the additional RM30 was for fogging...

checked, the groupon offer expired....non promo..coating is RM400...

Thanks for the info bro

 

[wingzee]

Hi Karl! Haha. Just about time to post some photos eh? Nice one bro. See you around @ Bomin.

 

[BlackCat]

Good effort there Karl! And nice ride too...

 

[Iceduke]

Thanks for the info bro

on 2nd thought, frankly their workmanship is so-so...went home and found some spots didnt quite rub away the coating fully...oh well..for rm130..cant expect much but if non-promo then ahem...

I think other places does better...

 

[Iceduke]

Hi Karl! Haha. Just about time to post some photos eh? Nice one bro. See you around @ Bomin.

yeap seeya @ BOMIN...prolly gonna do another visit in the coming weeks..need to replace the engine / trans mountings...

 

[coffee]

Iceduke,

A really nice and clean car you have there. Congratulations! And thanks for the plasti-dip tip.

 

[aidilj]

Bro Iceduke, there is no button on the steering wheel. Does it mean no auto cruise?

 

[Alex5522]

Clean and shining car good job bro..:top:

 

[Iceduke]

Bro Iceduke, there is no button on the steering wheel. Does it mean no auto cruise?

most jap spec cars did not come with the steering wheel controls...hence I am looking to mod it...ada jalan ke?

 

[aidilj]

most jap spec cars did not come with the steering wheel controls...hence I am looking to mod it...ada jalan ke?

http://forum.e46fanatics.com/showthread.php?t=544160

 

[wingzee]

http://forum.e46fanatics.com/showthread.php?t=544160

Time to DIY and seek sifu haywire/aidil for consultation.

 

[gendong]

Mf steering with paddle shift.........niceeee...........

 

[shiva73]

Bro Iceduke... Mind sharing where u got the plast-dip . I need one , time to start some little project . TQ in advance

 

[Alex5522]

Bro Iceduke... Mind sharing where u got the plast-dip . I need one , time to start some little project . TQ in advance

Shiva it was from Ace Hardware in Mid Valley sells the PlastiDip Spray (Black) for RM 40, as you can read bro Iceduke's post at: http://www.bmwclubmalaysia.com/forums/showthread.php?43051-Plasti-dip&p=773709&highlight=#post773709

 

[ghostrider]

http://forum.e46fanatics.com/showthread.php?t=544160

already have the multi function wheel but none of the buttons work :frown:
I was told only the wiring is missing... now I know for sure.

 

[Iceduke]

already have the multi function wheel but none of the buttons work :frown:
I was told only the wiring is missing... now I know for sure.

yeap the wiring loom harness can be bought from ebay, budget around 300-500 for it though, or if youre handy with electronics..RM10 tops, wires and some clips and solder will do. I am still considering doing the mod. The button panel can be bought on ebay too.