Remote Control Cars (nitro gas)

[rezzy3181]

Originally posted by muzamil@Jan 31 2006, 08:17 PM
hey u guys, i also own a nitro RC car bu mine is the Team Losi XXXNT Stadium Truck. I've been palying since i was small but the battery one lah... now only buoght the nitro one but haven't been playing for quite sometime.

anyone else have the off road RC?

yes once can drive good then can meet up and start our runs somewhere. still need to learn how to control as I had been driving toward peoples house gate that is driving on the real road.

 

[rezzy3181]

On 30th went to KLCC hobby shop going crazy... ask my wife to go to other shops, I stayed back at that shop looking at the 1/8scale, shit with twin exhaust at the tail like real car and cost close to 5K just the chassic and engine don't know what engine and looking at bodies and yes the BMW body don't look good at all but Alfas look cun. I am going to Hobby World Amcorp PJ to have a look as I need a good body for my car, will never end until my R/C is running smooth and complete.
Just can'nt wait for Albundy further advice, he is the sifu for this.

 

[BiMmEr78]

Wow i also wanna join but dunno how to start ... any1 selling their car cheap cheap with good condition do let me know .... after reading this thread im goin mad now ...

 

[KiNaKa]

hey rezzy i wanna join the R/C class already... hahaha

 

[three28]

Originally posted by BiMmEr78@Feb 1 2006, 11:48 AM
Wow i also wanna join but dunno how to start ... any1 selling their car cheap cheap with good condition do let me know .... after reading this thread im goin mad now ...

You are 2 months late mate. Sold my whole setup . Pro car , transmitter, special race bag , fuel, tools, high end servos, hop ups etc for only 1300

 

[BiMmEr78]

Oh man .... thats a good deal i would say ... next time call me 1st check whether im interested or not .... hehehhehe

 

[rezzy3181]

Originally posted by BiMmEr78@Feb 1 2006, 01:40 PM
Oh man .... thats a good deal i would say ... next time call me 1st check whether im interested or not .... hehehhehe

mana dia tau! :cry:

 

[rezzy3181]

Originally posted by KiNaKa@Feb 1 2006, 12:33 PM
hey rezzy i wanna join the R/C class already... hahaha

Which class you are going?

 

[rezzy3181]

Started changing my chassis and all good stuff, now need to get some bushes additional screws washers for some modification with the new setting, will be on the road soon.

 

[3251]

Looks like you are very very interested at this.
I got a 1/10th scale Fusion .21

Fully anodized alloy setup.
I crash it too often and had to replace it with stronger parts.

Mine can do up to 100km/h easily.
3 gears and a huge .21 engine.

 

[3251]

Another

 

[3251]

Crashed pic.

Broke the shock absorber, springs dissappeared, broke the upper and lower wishbone, cracked and bent chasis
Was doing about 70km/h went over a small dip, lost control of the rear end and hit a curb. All I saw was parts flying all over.

 

[rezzy3181]

serious lah yours really a good one I like the body, mine a learner model once I am good at it will go for better models.

 

[rezzy3181]

Albundy I got this picture from one of the sites but its 1/12 scale.
Please check out of any of this body I can get of 1/10 scale would love to get one.

I have done all the transfer of chassic and others but got a problem unsolve, the top frame is touching the gears as its to high now and unsolve and the other section the steering lingkage join still can't be fix as I got only one support as the shop in RJ talk cock with lots of spares but don't even stock bolt and nuts that I wanted to purchase.

Will post pictures soon after this as not uploaded yet.

 

[rezzy3181]

Albundy you can see after fixing the top new frame, it touches the gears so I have to put it to higher level and now I have the problem that the pin for the brake can't get in. what to do next?

 

[rezzy3181]

There is another area here the support I place it upside down, don't know it works or not as it touches the gears too.

 

[rezzy3181]

Now the steering support I manage to get one from the shop and another cut from my old top base where I have'nt drill hole for the top screw yet so small how to hold to drill.

All had been done accordingly with the help of AlBundy, change the engine support bracket to original and all done as original xcept exhaust manifold touching the wheel where I am grinding it, still not done to the thickness wanted slow process even with grinder, did and stop how to finish lah.

 

[hkh_88]

Anyone wanna sell ?

 

[rezzy3181]

My RC all done up with alot of help from our sifu AlBundy but I would advise anyone new to this hobby, its best you learn from those who had been long in it and don't just jump and buy 2nd hand and ended spending more still not to satisfaction when you see others are far in advance mechine and we are backdate.

True as advise by AlBundy don't waste money buying and in the end others are with lattest mechine and we come in with models outdated. Now I am about to learn how to drive and yet haven't done yet needs to do adjustment to my exhaust manifold touching my tyres, to grind but not finish yet. After I am ok in driving I might go for the lattest in the market and will consult my Sifu before I do anything.

The amount I spend probably could get the same model new, anyway learn thru mistakes and now right as Bundy says.

 

[ALBundy]

For those interested, this is RC forum for Malaysia. There is a classified thread too...

http://www.rctech.net/forum/forumdisplay.php?f=48