BMW E36 Programming, Security, Parts and Performance Parts IMPORT!!

  • Click here to become an Official Member of BMW Club Malaysia Download Form

JOKER

Banned
Joined
Mar 13, 2008
Messages
597
Points
0
These upgrade parts for e36 328i based on my experiance :rock: and may fit on E46, E36 M3, E36 325i, E36 318i and E36 320i. :burnout: Other, also avaliable for E90...., E60..., post reply for inquires....Check the attachment, the parts currently fit on my car!!!include a frog on the oil filler cap!!!:smokin:parts WILL DIRECTLY ship to you!!! (all parts was taxed):listen: Note: NOTE: Updated price included shipping cost and tax (10 - 25%) Price may change due to varies shipping cost for varies order. All parts depend on avaliable and shipping between 1 to 3 weeks. FRONT STRUT TOWER BAR ----------------- RM 450 or LESS :top: 92-98 BMW E36 6-cylinder STAINLESS STEEL EXHAUST HEADER -------------- RM ???? or LESS :top: 92-98 BMW E36 6-cylinderADJUSTABLE COIL OVER SPRINGS ------------------- RM 45092-98 BMW E36 ALLFlex Disc (Guibo) -------------------------------------------- RM ??? E36 328i, E36 M3, E46 M3, MZ3Front Door Lock Actuator ------------------------------------- RM ???E36 AllRear Door Lock Actuator -------------------------------------- RM ???E36 AllBall Joint; Lower Left/Right ----------------------------------- RM ??? 92-98 BMW E36 ALLThis is the upgraded all metal version from Meyle designed to remedy the premature failure problem with E36 chassis ball joints. M50/M52 Aluminum Thermostat Housing ------------------ RM 350 :top: 92-98 BMW E36 6-cylinderA COMMON FAILURE ! Replace your brittle plastic factory housing with this rugged aluminum one! Includes profile gasket.Steward High Performance Water Pump ----------------- RM 1300 :rock: 92-98 BMW M50/52/54 and S50/52 6-cylinder engineThis high performance water pump is a direct replacement pump designed to fit a wide range of BMW engines with no modifications. That includes accepting the Factory Fan Clutch. The front of the BMW High Performance Water Pump is stock appearing giving it that classic BMW look while the back is all business. Features up to 20% increase of water flow over stock pump, and it TWICE as efficient as factory pump, much less parasitic drag than other pumps, stainless steel impeller, heavy duty bearing, high quality water seal. THIS PUMP COMES WITH A LIMITED LIFETIME WARRANTY Racing Fuel Pump Upgrade ------------------------------------------- RM1800 :rock: later production 1995 M3 & 325i, all 1996-1999 M3, all 1996-1998 328i, all 1996-1999 328is, and all 1998-1999 323islater built E36 cars are much more prone to fuel starvation then the cars manufactured before January, 1995. This is caused by a less efficient siphon pick up tube in the driver’s side sending unit. During hard cornering this will cause the car to temporarily run out of fuel which can cause engine damage or cause the car to become unsettled at an inopportune time. With the later fuel pump sending units you can start having fuel starvation as early as 3/8 of a tank of gas where with the earlier sending units this condition does not start to occur until below ¼ tank. This kit is a great inexpensive way to get more fuel out of your tank. For endurance racing there are other more expensive ways to get all the fuel out of your tank, but for driver schools or sprint races this is the way to go. aFe Cold Air Intake Kit --------------------------- RM ???? :rock: E36 All 6-cylinder increase 40+ BHPM50 Plenum Adaptor Kit -------------------------- RM 2600 +/-AND 325i M50 Intake manifoldE36 For M52 engine, replace the OBD 2 intakeWith M50 OBD 1 intake 20+ BHP gain !!!Power Pulley Kit --------------------------- RM ???? :burnout: E36 325i 323i 328i M3 M Coupe/RoadsterDesigned them to underdrive the water pump, power steering pump and alternator*. Adding these is like getting FREE HORSEPOWER - there are no downsides and underdriving each of these accessories has been proven safe through years of on and off-track use. These kits provide a 10%-20% overall reduction in driving your car's systems.Kit includes water pump, power steering, alternator pulleys and belt. The T-6061 hard anodized aluminum pulleys account for a 10 to 20-percent decrease in accessory speeds, reducing the load on the engine but still maintaining a safe margin for reliability on all components. OBD2 DME/ECU programmer ------------------------ RM ???? :top: 20 pin or DLC to PC USB interfaceSCYTEK VisionGuard 8000 alarm system ------------- RM 2000 :top: Full Color Camera with Night VisionAutomatic picture capture upon security violationSelective picture capture through the remoteStore and recall up to ten discrete images on the LCD remote.One Carbon Fiber 2-Way True Color Picture remote control.One Carbon Fiber Slick 5-Button Remote With Super Bright Blue LEDBuilt-In Parking-Light Relay Programmable (+/-)One 5 button code hopping remote control Sleek Carbon Fiber with Super Bright Blue LEDPlug In LED and Override SwitchRemote Start Tachless Mode using Adaptive Digital Signal Processing -compatible with all vehiclesRemote Start Tach MonitorStarter Interrupt OutputDual stage Electronic Impact sensorPower door lock controlTrunk ReleaseParking Light Flasher programmable polarityCourtesy Light ControlAnti-grind OptionGas or Diesel compatibilityCold Start timerSelectable Engine Run TimeTurbo Timer (adjustable)Smart Network PortEasy programming Via your PC, Pocket PC or Valet sw. and Remote TransmitterLifetime Warranty
 
JOKER;307972 said:
STAINLESS STEEL EXHAUST HEADER ---------------------- RM 850 :top:
92-98 BMW E36 6-cylinder

Equal length ? What kind of stainless steel ?
picture will be nice :)
 
:listen:
Made with high quality T-304 stainless steel
Instantly increase 10-15 horsepower
Comes with all hardware for easy installation
:burnout:

PRICE will drop on multiple order!!!, many as possible.. :smokin:


The adjustable coil over:
Comes in 2 front and 2 rear
Manually height adjustable from 1-4 inches
eliminates body rolling, increasing performance during cornering and drifting
Work with all stock or after market shocks and struts
RACING DESIGN, REAL QUALITY, A MUST FOR DRIFTING AND HIGH SPEED CRUISING
All hardware included
 
Good Stuff!!

Hi-Performance Water Pump :top:
Engine Never Over Heat at any condition (except coolant leak or block) :rolleyes:

aFe Cold Air intake Kit :top:
Increase 20+ HP and Fuel economy... :eek:

Upgraded Fuel Pump (not OEM) :top:
Maintain HP during uphill/downhill or cornering!! :smokin:

:cool:
 
:listen:

ALUMINIUM ALLOY Under drive Pulley, :top:
lower the engine load, +HP/TOR, Fuel Economy;
Throttle respond, but weaker power steering
Best use with Hi-Performance water pump.


MAXIMUM SECURITY!!
SCYTEK VISION GUARD 8000 :top:
CAMERA CAPTURE ANY INTRUSION OR DAMAGING ATTEMPT :thefinger:
INSTANT VIEW IMAGE ON FULL COLOUR LCD ALARM PAGER


OBD2 Programer :top:
perform OBD2 DIAG and Programming the DME/ECU!!
with LAPTOP AND SOFTWARE :eek:
the programmer had been improved into compact design,
soo the product does not match the picture.
 
JOKER;308578 said:
OBD2 Programer :top:
perform OBD2 DIAG and Programming the DME/ECU!!
with LAPTOP AND SOFTWARE :eek:

Hope you don't mind more questions.
Can anyone with minimum knowledge program the ECU ?
Doesn't the ECU have to re-chip(EPRROM) in order to re-program it ?
How about car with OBDI ?
 
Flash programming EPROM
All OBD2 CAR only, because OBD2 DME/ECU use flash chip...
OBD 1 cannot be program, need to replace the chip with flash able chip
 
JOKER;308789 said:
Flash programming EPROM
All OBD2 CAR only, because OBD2 DME/ECU use flash chip...
OBD 1 cannot be program, need to replace the chip with flash able chip

*sigh*
Having a Wideband O2 at home without a programable ECU is just a waste.
Miss my E-mange.
But no doubt a good product with good price. Free bump.
 
does the obd2 programmer includes software..?? the function is only read and write files on the dme rite..? n of cuz diagnosis...
 
Hi Guys,

Good Day and salam. Direct to Bro. Joker, interested in buying the adjustable spring sets, ar they still in d market although has gone about a year back. Just gone thru ur parts selling today. Thread dated may 2008. pls pm me. Thank U.
 
nick4jc;318491 said:
does the obd2 programmer includes software..?? the function is only read and write files on the dme rite..? n of cuz diagnosis...

yes it read and write, what is your DME?, no diagnosis function.
some OBD1 can be flash, the SIEMENS MS41.0 DME for E36 328i.

i will check for it if it came together with software..??
 
rbojs123022;397950 said:
Hi Guys,

Good Day and salam. Direct to Bro. Joker, interested in buying the adjustable spring sets, ar they still in d market although has gone about a year back. Just gone thru ur parts selling today. Thread dated may 2008. pls pm me. Thank U.

i can get you the new one if you really want it...
 
turbology;308696 said:
Hope you don't mind more questions.
Can anyone with minimum knowledge program the ECU ?
Doesn't the ECU have to re-chip(EPRROM) in order to re-program it ?
How about car with OBDI ?

some OBD 1 supported, refer to the DME model
 
JOKER;398013 said:
i can get you the new one if you really want it...

Pls Pm me d price and also ur contact number. Outstation at d moment. Be back on d 14th next month.As a matter of speaking, does it fit to my 328i , as w ur info, currently using Koni adjustable c/w bilstein sport spring. spring capult, i guess so, damn soft. Koni about a year. T.Q Bro.
 
rbojs123022;398043 said:
Pls Pm me d price and also ur contact number. Outstation at d moment. Be back on d 14th next month.As a matter of speaking, does it fit to my 328i , as w ur info, currently using Koni adjustable c/w bilstein sport spring. spring capult, i guess so, damn soft. Koni about a year. T.Q Bro.

please note that it was not any low spring, it was coil over spring replacement for the
adjustable coilover suspension.,

give me the dimension soo i can check for you.
 
rbojs123022;398043 said:
Pls Pm me d price and also ur contact number. Outstation at d moment. Be back on d 14th next month.As a matter of speaking, does it fit to my 328i , as w ur info, currently using Koni adjustable c/w bilstein sport spring. spring capult, i guess so, damn soft. Koni about a year. T.Q Bro.


Hi Joker,
PM me ur contact number..had same concern with bro rbojs..my ride with koni soft hard adjustable shocks..intrested on the spring setsand best price.

thanks a million.
 
Yes Bro.
Mine it's not exactly coil over suspension, split unit... ha..ha.. cannot buy like that..huh...huh.. koni w/o coil over. bilstein lowered spring attached to original frame or seat. so How bro. joker ? any alternative ? my bilstein sudah manyak lembut la.. tarak syok !
 
Top Bottom