Reply to thread

Message: <blockquote data-quote="Morganl" data-source="post: 644955" data-attributes="member: 13931"><p>I'm not really a creative person so I can only refer to the spot that was used to install the 'chip' box per the installation video demo. the SA open the front bonnet and immediately took a deep look at that area. Once he found nothing at that area, he just close the bonnet without even taking a look at anything else (such as oil leak etc). This 'special inspection' was done prior to a rear wheel service where the SA has absolutely no reason to pop the front bonnet. Apart from the 'special inspection' at that specific area, SA didn't even bother to check on anything else.</p></blockquote><p></p>