Reply to thread

Message: <blockquote data-quote="tamade7" data-source="post: 256969" data-attributes="member: 1673">LCM = Light control module. If your car originally came without xenon then your LCM will not work properly if you change your headlight to xenon. Even if you do all the tricks mentioned e.g. install/pull fuse; you might still have flicker problems. The proper way is to change to a LCM that supports xenon. Try this page and you will understand <a href="http://www.realoem.com/bmw/showparts.do?model=AM54&mospid=47690&btnr=61_1060&hg=61&fg=35" target="_blank">http://www.realoem.com/bmw/showparts.do?model=AM54&mospid=47690&btnr=61_1060&hg=61&fg=35</a> Hope it helps. Remember if your car has the front and back fog lights make sure you buy the one with both the switches for front and rear fogs. Also you need to get it program to work with your new xenon and your mileage reading on your LCM.  In summary below is what you should do: 1) Check your LCM part number and if your LCM do support xenon then just get it program. 2) Get a new LCM that supports xenon 3) Install it and get it program to xenon and alos program your mileage. Are your new headlight original bmw? For your angle eyes prob I don't have a solution for ya.</blockquote>