Reply to thread

Click here to become an Official Member of BMW Club Malaysia Download Form

Message: <blockquote data-quote="aidilj" data-source="post: 30042" data-attributes="member: 20536"><p>To run NCS-Expert you'll be needing a 32bit machine because it's a 16bit tool. I'm running Windows XP virtualized on Windows 7 64bit using VMware workstation 8 which also can run GT1 image created with VMware workstation 6.EDIABAS is a requirement for NCS-Expert, so it is installed along with INPA to make sure the interface is good. Then follow the instructions here to create your own coding profile and to code <a href="http://forums.m3cutters.co.uk/showthread.php?t=33054" target="_blank">http://forums.m3cutters.co.uk/showthread.php?t=33054</a>Guys please use this tool at your own risk and please make backup of the original file before changing anything just in case. I will not be resposible if you screw up your car. This thread is meant only for us to appreciate the amount of complexity/flexibility a relatively old and stripped-out-of-feature model has.Here are my screen captures after you have created the coding profileVanilla Xp<img src="http://i791.photobucket.com/albums/yy197/aidilj/ncse/1.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Tool of interest<img src="http://i791.photobucket.com/albums/yy197/aidilj/ncse/1_G.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Welcome screen<img src="http://i791.photobucket.com/albums/yy197/aidilj/ncse/2.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Load expertmode profile<img src="http://i791.photobucket.com/albums/yy197/aidilj/ncse/3.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Press F1missing screenPress F3<img src="http://i791.photobucket.com/albums/yy197/aidilj/ncse/4.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Choose chasis<img src="http://i791.photobucket.com/albums/yy197/aidilj/ncse/5.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Choose module to read VO (vehicle order) from, usually the one with prepended A character. VO contains the car configuration and what other modules are available and can be read from.<img src="http://i791.photobucket.com/albums/yy197/aidilj/ncse/6.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Read ok, hit the back button<img src="http://i791.photobucket.com/albums/yy197/aidilj/ncse/7.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Lists modules available and can be read, hit process ecu<img src="http://i791.photobucket.com/albums/yy197/aidilj/ncse/8.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Choose ecu/module to read, I chose akmb (kombi/ike/cluster) in this example, hit ok<img src="http://i791.photobucket.com/albums/yy197/aidilj/ncse/9.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />hit read ecuhttp://i791.photobucket.com/albums/yy197/aidilj/ncse/10.pngAfter reading is done, this window will popup. Close it. In your WORK directory of NCSE, FSW_PSW.TRC will be updated and value read from the module will be dumped into it. Everytime you do a read from a module this file will be overwritten, so make a copy of the file before reading from another modulehttp://i791.photobucket.com/albums/yy197/aidilj/ncse/11.pngIn the following posts, all the TRC files are translated with google translate so it might not be perfect, original file attached. A good tool to read and manipulate TRC file is NCS Dummy, <a href="http://forums.bimmerforums.com/forum/showthread.php?t=1553779" target="_blank">http://forums.bimmerforums.com/forum/showthread.php?t=1553779</a> .Out of the ten listed modules only 9 can be read because the radio is no longer there.Cheers</p></blockquote><p></p>

Verification