Reply to thread

Message: <blockquote data-quote="V-Man" data-source="post: 575625" data-attributes="member: 2609">After reading some precious info and advise from the gurus... am waiting for the kucing to come back to me on some calculations <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" /> My findings:- Both m20 single mass and m50 double mass has the same diameter 228mm- Both M52 328i and M3 has 240mm on the flywheel.- Stock dual mass flywheel = ~11 KG (just the flywheel)- M20 flywheel (single mass) = ~7 KG (just the flywheel)- m20 clutch kits are cheaper compared to M50 kits (pressure plate, clutch etc)- M20 starter motor (the M50 starter will not mesh with an M20 flywheel)- E21 323i release bearing (30mm height)- M20 flywheel bolts as the M50 items are too long (new pressure plate bolts too)- M20 flywheel machined to fit the M52. This involves removing a minimum of 4mm up to 10mm- Single mass gear rattle at idle. This was probably my biggest concern about it but the perks are more fun to have <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" /></blockquote>