Reply to thread

Message: <blockquote data-quote="mielo86" data-source="post: 568735" data-attributes="member: 23417">i've just finish trying to DIY my radiator but in no luck doing so since i don't have the proper equipment...From my last visit to Autobahn, the mech suggested me to change my mount plate, pipe connector and radiator...because i just changed the radiator last September, i insisted him to change only the mount plate and pipe connector..and that proof to be a mistake because my water problem still not solve untill today..so tonight i decided to DIY and change the radiator with the old one which I still have in possession..it take time for me to learn and finally have the gut to DIY..but after 1 hour of trying, i have to call for a stop due to lack of proper equipment to do this kind of DIY..this work require you to have a T25 Torx screw driver to be able to detach the fan shroud..so the best solution is sending my car tomorrow to workshop and just let the pomen do their work..will incur  some money but still will safe me the time and kederat...Lesson learn, when intending to DIY, make sure you have the proper equipment or else you will only be wasting time and energy.:102:</blockquote>