Reply to thread

Message

<blockquote data-quote="jarance" data-source="post: 476318" data-attributes="member: 21">RR78,Just do the following:-1. Go to &quot;Setting&quot; Menu.2. Click once and &quot;GPS Path&quot; icon.3. Click &quot;Storage card&quot; folder4. Select &quot;Papago&quot; folder and Select &quot;OK&quot;5. Navigate in the Papago folder and select &quot;X5SE_800x480_C2_B9600.exe&quot; and press &quot;OK&quot;6. The GPS should update to the above &quot;.exe&quot;7. Press the &quot;HOME&quot; icon (look like a house) and press &quot;GPS&quot; icon. Your Navi program will be invoke.p/s there is a slight delay in the papago navi program. Reason is that it is setup as C2 and 9600 baud rate. Hence the updating isa bit slow. whereas the iGo is set to Com2 and 57600 baud rate.Trying to set papago to baudrate of 57600. WIP.p/s. do the above if you want the i-Drive skin by selecting &quot;WolfNCU&quot; folder and &quot;WolfNCU.exe&quot;</blockquote>

[QUOTE="jarance, post: 476318, member: 21"] RR78, Just do the following:- 1. Go to "Setting" Menu. 2. Click once and "GPS Path" icon. 3. Click "Storage card" folder 4. Select "Papago" folder and Select "OK" 5. Navigate in the Papago folder and select "X5SE_800x480_C2_B9600.exe" and press "OK" 6. The GPS should update to the above ".exe" 7. Press the "HOME" icon (look like a house) and press "GPS" icon. Your Navi program will be invoke. p/s there is a slight delay in the papago navi program. Reason is that it is setup as C2 and 9600 baud rate. Hence the updating is a bit slow. whereas the iGo is set to Com2 and 57600 baud rate. Trying to set papago to baudrate of 57600. WIP. p/s. do the above if you want the i-Drive skin by selecting "WolfNCU" folder and "WolfNCU.exe" [/QUOTE]

Verification