Reply to thread

Message: <blockquote data-quote="fabianyee" data-source="post: 354527" data-attributes="member: 6">cheap thing no good, good thing no cheap... There are industrial application insulation foam and automotive foam... There are big differences in both types..  I did my chassis foaming in KL Auto using automotive foam...The foaming was done on the B pillar and the under door sills... Vast difference in rigidity, can feel less chassis flex under hard cornering... if you're a DIY person can buy the Wurth automotive foam and DIY ... Last i heard, these foam cans cost quite a bit too... Don't use the cheaper industrial foam which is flammable and not water-proof...</blockquote>