Reply to thread

Message: <blockquote data-quote="Lionel_Koh" data-source="post: 16875" data-attributes="member: 205"><p>I heard lot of ECU remapping for the BMW using OBDII onward ......The method normally is u send ur car to the tuner and they will read ur car data and EWS thing and flash in another setting to ur car ........But recently i experience with the on car ECU remapping done by my fren.......According to him , on car remapping result is more impressive and significant as the new setting is according to ur car engine condition and mods tat hv been done like exhaust, filter , cam etc .....So normal remapping just a better mapping then a factory setting and on car remapping is specific for tat car only .........So just share my experience here cos i sent my fren E36 328 for the remapping ........The 1st thing to do is to install all the hardware to the car to read the car current air fuel ratio and others timing setting ......<img src="http://i5.photobucket.com/albums/y168/Lionel_Koh/DSC00040.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />The tool - Air - fuel reader .......<img src="http://i5.photobucket.com/albums/y168/Lionel_Koh/DSC00041.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />The sensor install to the exhaust .....<img src="http://i5.photobucket.com/albums/y168/Lionel_Koh/DSC00043.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />The air fuel reader stick on the windscreen for better viewing ....</p></blockquote><p></p>