Reply to thread

Message: <blockquote data-quote="virtualmystic" data-source="post: 389248" data-attributes="member: 5576">I really do not mean to put down anyone but I had a unsatisfactory experience with Theva who if I am correct carries out his business in SS19 Subang Jaya. I was interested in the fibreglass  panel which fits underneath the steering column. The part looked acceptable .....but the way his workers tried to install it was highly unacceptable. They drilled a hole in the metal trim to mount the panel withthe use of a self tapping screw (which is normally used for woodwork). I told him this is not acceptable because even the original plastic expando fasteners tore a hole in the thin metal trim over the years of service. What more a bare screw threaded directly onto the trim! His reply "this is the "normal" way we do it. Well, I told him his "normal" way is wrong.A friend of mine who dirves a mercedes 300CE also had a similiar incident with him. They drilled new holes to provide a mounting for his bodykit when there were already mounting holes provided! My advice, inspect the part you want to buy, it mght be acceptable but give detailed instructions on how to mount it or you will end up with new holes in your car!</blockquote>