Reply to thread

Message: <blockquote data-quote="jarance" data-source="post: 458394" data-attributes="member: 21">yee, as mentioned by you, the sensors are new so I think your problem is most likely due to:-1. connectors to the sensors is dirty or corroded. you need to disconnect the connector and spray with contact cleaner.2. check the cable between the front sensor and rear sensor. They might be damaged.I dont think this alarm is registered as it a non fatal signal. When the brake pad is near to end of its usage, this alarm will intermittent come ON and OFF when the brake pad is just near its end of life. It will stay ON continuously when the sensor get nearer to the brake disc (metal part).</blockquote>