Reply to thread

Message: <blockquote data-quote="affan66" data-source="post: 261845" data-attributes="member: 65">not yet  i just found out that my PDC wires were cut.  There are four sets of wires from the control unit but only one has the connector.  The rest are bare wires. I also checked that the bumper needs the insert for the sensor to rest on besides getting the right bumper strip. The good thing is that the bumper has four holes ready for the sensors. The way this PDC works is that it needs to have all the sensors connected and working. If one fails, the PDC will go into the "safe" mode and all sensors go to sleep. Darn. This will have to wait for a while.  Anybody got good leads at potong shops, lemme know.</blockquote>