Reply to thread

Message: <blockquote data-quote="jaleeks23" data-source="post: 401011" data-attributes="member: 8431"><p>My adjusters have all been fixed. Using Korean HID with their original 4K bulb. Because my original is H7, I had to sacrifice the bulb holder by cutting a hole nicely so that the HID bulb's wire can come out and connect to the ballast. My HID bulb sits on the bulb holder nicely and the bulb markers must follow the bulb holder's marker as well. Keep in mind bulb holder has an indicator that your bulb must follow. My installer used some type of glue, super hard, once dry become like plastic to make sure the marker is aligned, facing up. This usually is the problem where the beam is too low, bulb not sitting nicely (assume everything else is fine)</p></blockquote><p></p>