hi guys,recently my gearbox experienced kicking when shifting the gear... kinda 'bukk' sound at the back... don't know what exactly is that...to engage reverse it take approximately 1secmmmmm.....my Gearbox will kong soon? :25:wargghhh (walet oledi cry) :bawling:
E36 328 transmission.......
- Thread starter Zul_84
- Start date
-
Click here to become an Official Member of BMW Club Malaysia Download Form
dannybaba13
Club Guest
- Joined
- Sep 8, 2007
- Messages
- 250
- Points
- 0
my advise...1st prepare to overhaul ur gearbox,, the bukkk sound maybe is ur gear bush is wear orledi....change n see how??very cheap..yup hav to change the gearbox oil try the toyota gearbox oil.very good!!! try 1st .buy from toyota service centre...very good oil,, let me tell u bro ..ur gearbox hav a 1sec lopp is jst a starting point of ur gearbox going to rosak,,if 5sec loop pls be prepare..even u change the oil still a bit promblem,,i can help u to repair n give advise like new n overhaul less then rm 2.3k..serious..tq d
Russie
Club Guest
- Joined
- Dec 17, 2006
- Messages
- 933
- Points
- 18
leforte;250297 said:
i was abt to ask this too... is it ok for bmw to use toyota gear oil?? back then when i was driving wira 1.6 auto, i was told to use only genuine proton gear oil cos the gearbox is super sensitive. In this case, how?
musclehedz
Club Guest
- Joined
- Apr 22, 2005
- Messages
- 399
- Points
- 0
toyota atf on a gm/zf transmission hahahahaha hahahaha hahahahaha hahahahaha
one must be a dumb ass to do that hohoho
1) GM transmissions calls for a Dexron specification atf. In this case, a Dexron III.
2) Toyota Type I,II,III,IV are not Dexron specs, they contain friction modifiers and a different additive package.
can use, no problem, sure boleh, boleh punya, sama saja... sure can use, put water also can use, put minyak masak also can use, the question is can use for how long before the transmission self-destructs.
*PS: by saying filling in a gm transmission with toyota atf is of the most dumbest advice i have heard from someone who does not know what one is even talking about. if you have heard this from someone else, tell that person he/she is dead wrong.
one must be a dumb ass to do that hohoho
1) GM transmissions calls for a Dexron specification atf. In this case, a Dexron III.
2) Toyota Type I,II,III,IV are not Dexron specs, they contain friction modifiers and a different additive package.
can use, no problem, sure boleh, boleh punya, sama saja... sure can use, put water also can use, put minyak masak also can use, the question is can use for how long before the transmission self-destructs.
*PS: by saying filling in a gm transmission with toyota atf is of the most dumbest advice i have heard from someone who does not know what one is even talking about. if you have heard this from someone else, tell that person he/she is dead wrong.
python_dev
Club Guest
- Joined
- Apr 24, 2007
- Messages
- 303
- Points
- 16
Proton Gearbox always super sensitive... Driving may cause it to breakRussie;250331 said:
anaksarawak
Official Member
- Joined
- Jan 20, 2007
- Messages
- 4,154
- Points
- 0
Have your car checked by professional technician. You may bring it to Sapura Auto for check.
thanks for you guys opinions and suggestions,
my mech said 'bukk' sound, come from gear bush/mounting.....
kicking when shifting.... will change the ATF first then see what happen (use bm ATF)
i know, i cant run from reconditioning this bloody gearbox soon.... huh
my mech said 'bukk' sound, come from gear bush/mounting.....
kicking when shifting.... will change the ATF first then see what happen (use bm ATF)
i know, i cant run from reconditioning this bloody gearbox soon.... huh
dannybaba13;250237 said:
Toyota oil? you dannybubu know what tokking you??? do get your claims right with proper facts to back it up before you start giving any advise. just wondering what you use for your engine oil, AXE brand??? minyak cap kapak?
help to repair? probably you need some help yourself? try getting a bentley manual as a first attemp. do make sure you get the one for the right make and model though.
toyota oil??? its not even the same grade or spec in the first place.
Joe80
Club Guest
- Joined
- Dec 12, 2006
- Messages
- 33
- Points
- 0
i change mine last month.....
center bearing price RM190 and rubber coupling RM280
its not include labour charge and i dont know because i did together with gearbox overhaul.....
but i heard last 2 weeks, spare part price increase already.
center bearing price RM190 and rubber coupling RM280
its not include labour charge and i dont know because i did together with gearbox overhaul.....
but i heard last 2 weeks, spare part price increase already.
Joe80
Club Guest
- Joined
- Dec 12, 2006
- Messages
- 33
- Points
- 0
Zul_84;251715 said:
mine E36 318, it cost me 2.5k include new clutch plate, flywheel oilseal and all oil seal/ring that will cause leaking.
for 328i, net price a bit higher. Roughly the price is 3k. But it depent to part need to change. so the cost maybe slightly higher or lower than that.
just change ATF.... last monday
before changing ATF got some 'kick/jerk' in gear shifting (when shift up & down)
now the 'kick' minimize and not frequently as before, this time just 'kicking' when i drive slow ( 40 to 60km/h), but 80km/h to top speed no kicking. maybe there is something wrong with the 3rd gear i think...
looking for overhaul next month... anyone can give recommendations which workshop is good and in good cost too.
.
before changing ATF got some 'kick/jerk' in gear shifting (when shift up & down)
now the 'kick' minimize and not frequently as before, this time just 'kicking' when i drive slow ( 40 to 60km/h), but 80km/h to top speed no kicking. maybe there is something wrong with the 3rd gear i think...
looking for overhaul next month... anyone can give recommendations which workshop is good and in good cost too.
.
