Reply to thread

Message

<blockquote data-quote="andrewk" data-source="post: 509153" data-attributes="member: 3188">1) I&#039;m also keen on this upgrade.&nbsp; Let me know how u do it!2) Yazmeen can do this for u3) Yazmeen can do this for u too!&nbsp; He&#039;s running a GB on this.&nbsp; I think we&#039;re 2 or 3 cars short of the 5 required.4) Will PM u the shop.. also ask Yazmeen coz the shop is next to his office.&nbsp; alternatively, check with digitalpunk or kadir.&nbsp; They have change their HU.&nbsp; See if they still have their ori unit and strike a deal.5) Will PM u the shop I went to.&nbsp; Lots and lots of rims for E38 there.6) Our exhaust system is already a twin pipe setup.&nbsp; Just change exhaust tip only for quad pipe look.&nbsp; You will need to cut your existing bumper or get the ACS rear skirts.&nbsp; Some US E38 don&#039;t cut the stock bumper and just run the tailpipe below it.&nbsp; IMHO, its too low and doesn&#039;t look right.&nbsp; Also, you will have to mod your muffler brackets to lower it as it will be too high in its stock position if the bumper is not cut.&nbsp; ACS kit - ask Unker Vincent.&nbsp; Exhaust, I&#039;ll PM u the guy i went too.&nbsp; however, that won&#039;t change the sound tho... for that, you&#039;ll need to at least change or mod the muffler or get aftermarket system.</blockquote>

[QUOTE="andrewk, post: 509153, member: 3188"] 1) I'm also keen on this upgrade. Let me know how u do it! 2) Yazmeen can do this for u 3) Yazmeen can do this for u too! He's running a GB on this. I think we're 2 or 3 cars short of the 5 required. 4) Will PM u the shop.. also ask Yazmeen coz the shop is next to his office. alternatively, check with digitalpunk or kadir. They have change their HU. See if they still have their ori unit and strike a deal. 5) Will PM u the shop I went to. Lots and lots of rims for E38 there. 6) Our exhaust system is already a twin pipe setup. Just change exhaust tip only for quad pipe look. You will need to cut your existing bumper or get the ACS rear skirts. Some US E38 don't cut the stock bumper and just run the tailpipe below it. IMHO, its too low and doesn't look right. Also, you will have to mod your muffler brackets to lower it as it will be too high in its stock position if the bumper is not cut. ACS kit - ask Unker Vincent. Exhaust, I'll PM u the guy i went too. however, that won't change the sound tho... for that, you'll need to at least change or mod the muffler or get aftermarket system. [/QUOTE]

Verification