So I saw some members are using the tool, think I will share some info. LCM Options: To enable or disable the annoying DRL: -select “coding data” -toggle the options for “running lights” ZKE Options: To do any of the functions in the ZKE section: - select “Coding data” To activate the alarm optics without having a physical alarm: -check DWA -check the options with “optics” Note: If you have bits and pieces of the OEM alarm, you may enable those options To activate an OEM alarm: -check DWA -check DWA interior sensor -uncheck DWA interior sensor, rear (unless you have a convertible which has a front and rear interior sensor) -check DWA tilt alarm sensor -check the options with “optics” and “acoustics” Note: you must have all 3 (4 for convertibles) pieces to the alarm otherwise your car will throw a code. e.g. you have the siren and motion sensor but no tilt; your DWA will show a fault and will not arm. Siren will still go off if doors are breached. To enable remote closing windows: -default “Opening (remote control)” is checked and “Locking (remote control)” is unchecked -check “Locking (remote control)” to enable closing with remote Note: the lock button closes and unlock opens the windows upon holding of the key To enable one click to unlock all doors: -default “Selective” is checked. This allows one click of the unlock button of the remote to unlock the driver’s door. A second click unlocks remainder passenger doors -check “No” to unlock all doors with one press of the unlock button To change the tilt of the passenger mirror when in reverse: -default “Memory” is unchecked -set mirror switch to passenger, the mirror will tilt to your personal position. - Set your position, have switch on passenger side, and adjust your mirror while in reverse gear. Note: if ”Memory” is checked mirror switch must be set to passenger for option to work. Switching to driver will disable the auto-tilt. Note: if ”Memory” is unchecked mirror switch must be set to driver for tilt to work (by default it tilts to the maximum amount). Switching to passenger will disable the auto-tilt. EWS Options: To check the number of keys you have used: -select key status -you may also disable keys if you lost them from this menu as well Note as you can see, I have two keys out there in the world from the previous owner as I only own two of them To view live data: -select live data To DISABLE the clutch switch: -select “Coding data” -select “Settings and manufacture settings” -select Manual transmission Note: only for manuals Note: this allows you to start the car without having to depress the clutch SRSOptions: To view live data about your airbags: -select live data To DISABLE seat occupancy sensor: -select “coding data” -select “Equipment” -uncheck “Seat occupancy recognition” Note: I have not tired this as I do not need to nor have I installed aftermarket bucket seats To DISABLE seat belt light: -select “coding data” -select “Equipment” -uncheck “Seat-belt buckle switch” Note: I haven’t tried this myself as I always wear a seat-belt nor have a race harness IKE Options: In the IKE menu you can change items such as service intervals frequency (i.e. km/mi until next service), etc Got my scanner from here, installed on windows 7 64bit, had it for 2 years, used many times. It works just fine.