My cylinder head needs changing and my regular mechanic is finding it hard to get a good, used unit. Need to have some feedback on the following: A) Where can I get a USED cylinder head, 'B) How much am I expected to pay for one C) How much to pay for a NEW unit and D) Where is the best place/workshop to get the change done? Thanks.
E36 Coupe - Cylinder Head
- Thread starter din888
- Start date
-
Click here to become an Official Member of BMW Club Malaysia Download Form
wolverine
Club Guest
- Joined
- Feb 1, 2005
- Messages
- 673
- Points
- 0
Check wif B.A. Auto in Sg Penchala...77250239,
saw a few E36s there lately.A used unit might cost bout RM1k,I think.
Also, check wif Stuttgart in Tmn Mayang...78040966,
a lot of cyclinder heads there,bit on the high side though.
Regards B)
saw a few E36s there lately.A used unit might cost bout RM1k,I think.
Also, check wif Stuttgart in Tmn Mayang...78040966,
a lot of cyclinder heads there,bit on the high side though.
Regards B)
affan66
Founding Member
- Joined
- Dec 5, 2004
- Messages
- 4,455
- Points
- 0
expect to pay about RM2-3K for a used M50 cylinder head. Make sure you send the cylinder head for a leak test. There are many out there but most are farking useless. Cracks or skimmed to no use. Make sure you get the right gasket (two types) to match too.
