Separate names with a comma.
Discussion in 'F10, F11, F07' started by gendong, Jan 21, 2017.
Where do u live bro? Perhaps some member can recommend a place thats nearer to u.
Reasonable price. Should consider replacing gear box oil if you have not done so previously.
I’m in cyberjaya. Any good shop (clean workshop) within Klang Valley will be good
Try BlueGreen in Jln 222, Sec.51A PJ or Naidu at Petaling Utama.
informative thread! very good.
Thank you for sharing!
how much is it to service back at bmw dealer compare to the workshop outside ?
Going back to authorised SC would set u back approx. 30-40% more from outside workshop, dependent on what service required.
if you are from Cyberjaya, try my usual workshop located at :
30, Jalan Meranti Jaya 11,
Taman Meranti Jaya Industrial Park,
47120 Puchong, Selangor.
Mobile : 016-6572782
The Mechanic name is Yong. This guy charges are reasonable and good quality workmanship. Most importantly, he is an honest mechanic. This is rare to find these days.
Example of honesty :
1. Water could not shoot out the nozzle to clear windscreen. Sent to him, he cleaned the hose because it was clogged. Other mechanic would have probably told me that motor rosak. (For F10)
2. Power window was not working, he opened up, did some soldering as he mentioned it was a loose connection. Other mechanic probably would have told me to change the power window motor. (For Dad's Wira)
I have done the following with him :
1. Change front and rear brakes.
2. Sealing of firewall gromet.
3. Change Gearbox Oil.
4. Change engine mounting.
Its a small shop but he does excellent work
Hi guys, i am new here. wanted to ask any good workshop around penang or butterworth?
Thanks in advance
If your car is beyond 100k, check your EGR system, if dirty ask them to clean it out. Engine needs fresh air to burn. If these don’t sort out, I suggest checking your timing chain especially if yours is N47 engine.
Those of you that has lost your lock nut key to your wheels, Ingress charges RM20 to use their set of keys to open your locked lug nut. Decided to switch to the normal non lockable nuts, the cost per lug nut is RM19.10.
Long rubber seal that is attached to the body of your car at front passenger side is RM450. Installation belum kira but i think can DIY.
Price of the long rubber seal that sticks to your door is also RM450.
Air cond compressor for 535i is approx RM1,800. To be changed with drier RM200. Workmanship another RM150.
Having a problem with my F10 (5 Series).
I been adviced by BMW that my all my absorbers need to be replaced and my turbo started to have problem.
It's hefty charges literally threw me off, can I get a recommendation where I can get it replaced with much more reasonable charges.
By the way I am from Ipoh, I wouldn't mind coming to KL to get it fixed
Whats the mileage u hv clocked bro?
I didn't check that, its about 7 Years old and the mileage is quite high. Sorry couldn't respond specifically
Your absorbers can be repaired around RM5000 at Reiber, Pandan Indah. At least they can still be electronically controlled. Or perhaps get a brand new Blienstein, cost around the same I guess. Turbo can find half cut, just make sure your workshop can verify that the replacement turbo is good to go. Just did mine too, plus I changed the rear differential as well due to some annoying noise here and there. Did all at Vebo Cyberjaya. Really nice workshop for Bimmers. Spot on!
Original radiator for n55 - rm1400
My F10 may need to change cooling coil. How much is the expected cost of cooling coil if were to do in outside workshop?