Perodua Latest Model

[Lionel_Koh]

Perodua will be launch their latest model soon, just want to share some infor that i get.

[Lionel_Koh]

Pic 2

[Lionel_Koh]

Front view

[Lionel_Koh]

Rear view

[Lionel_Koh]

The car come in 1000cc (Just manual) n 1300cc(manual & auto) + Premium (wit airbag + others accery). price yet to confirm. Some spec infor;

Overall length mm 3,600
Overall width mm 1,665
Overall height mm 1,550
Interior length mm 1,830
Interior width mm 1,400
Interior height mm 1,275
Wheelbase mm 2,430
Track Front mm 1,460
Rear mm 1,465
Minimum road clearance mm 150
Minimum
turning radius Kerb to kerb m 9.4
Wall to wall m 10.2
Kerb weight 5 M/T kg 940
4 A/T kg 955
Gross vehicle
weight 5 M/T kg 1,450
4 A/T kg 1,450

Seating capacity persons Front 2, rear 3

Engine type K3-VE, petrol, 4-cylinder, DOHC, 16-valve, DVVT

Bore x stroke mm 72.0 x 79.7
Total displacement cc 1,298
Compression ratio 10
Max. output kW/rpm 64/6,000
Max. torque Nm/rpm 120/3,200
Fuel system EFI (Electronic fuel injection)
Fuel tank capacity litres 40

Steering type Rack and pinion
Clutch 5 M/T Dry single plate diaphragm
Transmission 5 M/T Forward 5-speed, manual, all synchromesh
4 A/T Forward 4-speed, full automatic
Transmission

gear ratios 5 M/T 1st:3.182, 2nd:1.842, 3rd:1.250, 4th:0.865, 5th:0.750, Rev:3.143
4 A/T 1st:2.731, 2nd:1.526, 3rd:1.000, 4th:0.696, Rev:2.290

Final reduction
gear ratio 5 M/T 4.267
4 A/T 4.032
Brakes Front Ventilated disc brakes with booster
Rear Drums, leading and trailing
Parking brake Mechanical hand operation
Suspension Front MacPherson struts with coil springs
Rear Semi-independent torsion axle beam with coil springs

Tyres 175/65R14
Fuel consumption
(EU combined mode) 5 M/T L/100km 5.8
4 A/T L/100km 6.4

[Juan Powerblow]

I'm proud of Perodua. Their Kelisa and Kenari have proven to be very good quality and sturdy vehicles. They got the right market segment to grow and this new offering looks very appealing. Their success has made Proton's dismal failure even more pronounced!

[Lionel_Koh]

Interior

[Lionel_Koh]

Don't too excited too early,above pic is the Daihatsu Boon or Toyota Passo. The new model is the JV btw Perodua, Daihatsu n Toyota. The Malaysia Perodua version is as below.

Front n rear view.

[Juan Powerblow]

Originally posted by Lionel_Koh@Apr 3 2005, 07:17 AM
Don't too excited too early,above pic is the Daihatsu Boon or Toyota Passo. The new model is the JV btw Perodua, Daihatsu n Toyota. The Malaysia Perodua version is as below.

Front n rear view.
It still looks pretty good even tho not as nice as the JDM.

[Lionel_Koh]

Originally posted by Juan Powerblow+Apr 3 2005, 02:21 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Juan Powerblow @ Apr 3 2005, 02:21 AM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Lionel_Koh@Apr 3 2005, 07:17 AM
Don't too excited too early,above pic is the Daihatsu Boon or Toyota Passo. The new model is the JV btw Perodua, Daihatsu n Toyota. The Malaysia Perodua version is as below.

Front n rear view.
It still looks pretty good even tho not as nice as the JDM. [/b][/quote]
Not too badlah,still will be the best look for Perodua Model.....i think

[saat]

Hmm, let me help them:

Kanchil - Land Mamal
Kanari - Bird, Air
Kelisa - Fish, Water
Kembara - Not animal but still starts with a K
Rusa - Land Mamal, Odd ball dont even start with a K

Suggestions for name:

Kuda - Too simple too commonplace
Kasawari - Good, very exotic
Kijang - Nah....
Kambing - No way
Kenyalang - Good, very exotic but difficult to pronounce by many
Kobra - Nah....
Kupu-kupu - Too soft
Kriket - Too western
Kumang - Too dirty

Insect checked, shell fish checked, reptiles......stumped

Admire Pro2 but not their drivers. They got chip on their shoulder or they tend to pack it in too much.
Kanari is a bit of an odd ball, I think they needed to be in keeping with ProTONNE with their Juara.

[Lionel_Koh]

Originally posted by saat@Apr 3 2005, 02:33 AM
Hmm, let me help them:

Kanchil - Land Mamal
Kanari - Bird, Air
Kelisa - Fish, Water
Kembara - Not animal but still starts with a K
Rusa - Land Mamal, Odd ball dont even start with a K

Suggestions for name:

Kuda - Too simple too commonplace
Kasawari - Good, very exotic
Kijang - Nah....
Kambing - No way
Kenyalang - Good, very exotic but difficult to pronounce by many
Kobra - Nah....
Kupu-kupu - Too soft
Kriket - Too western
Kumang - Too dirty

Insect checked, shell fish checked, reptiles......stumped

Admire Pro2 but not their drivers. They got chip on their shoulder or they tend to pack it in too much.
Kanari is a bit of an odd ball, I think they needed to be in keeping with ProTONNE with their Juara.
Ha...ha..... :D :D bt bang saat will kecewa this time cos i think the new model name is Perodua Boon.......at least something diff.

[saat]

Add the following:

Kelawar - Nice ring to it
Kluang - Foxbat, kluangman bat man

Boon - Blech! add tot and what you get......

[affan66]

saat, I'm a P2 driver. Next time I see you in USJ, I'll kick your a$$. I'll bring Mikoloh along. Hahaha...

I think the name is Perodua MyVI (as in my vehicle). This was based on some source in the Perodua and Latest News Threads in Autoworld. Price I think around RM46K for the entry level.
I think ABS and airbags are options.

Kudos to P2. Time to remove P1.

[3er]

Perodua Kentang....

[Juan Powerblow]

Perodua Kupang Lari
Perodua Burung Kakak Tua???

[saat]

affan66 Posted on Apr 3 2005, 09:51 PM
saat, I'm a P2 driver. Next time I see you in USJ, I'll kick your a$$. I'll bring Mikoloh along. Hahaha...



Mike in a P2 - sureornot - Like me, where can fit thru the doors.

[5201]

Originally posted by affan66@Apr 3 2005, 09:51 PM
saat, I'm a P2 driver. Next time I see you in USJ, I'll kick your a$$. I'll bring Mikoloh along. Hahaha...

I think the name is Perodua MyVI (as in my vehicle). This was based on some source in the Perodua and Latest News Threads in Autoworld. Price I think around RM46K for the entry level.
I think ABS and airbags are options.

Kudos to P2. Time to remove P1.
My fren have placed a booking for the MyVi/Boon, still donno what its called yet. Expected launch end April/early May 2005. Price: RM45K-49K.

Looks very nice, and reliable. Another success story by P2 in the making??

P1 needs to close shop and go back to being an assembler.... and they have 9 production plants (mostly JV) worldwide, also in Indo, which is supposed to cater for export??? WTF??? Then if all the production plants in Msia are for local market only, how to get economy of scale??? No wonder they need protection (as if 20yrs of exclusivity is not enuff???)

Fark P1, support P2 all the way with their willingness to innovate.