Can we or do we want this?

[aRRrgghh]

eerr.. found this in the net, can't remember which country.. anybody think that this is a good idea for us to have it? .. :rolleyes:

[BiMmEr78]

Bro its a cool idea ... Comittee please take note on this ... our club will be more pretigious with it

[mini_jeff67]

From Queensland, Australia? But E46 where to fit? On number plate like the YBs and DUNs and such? No la...

[willie]

wah, nice nice....

[Juan Powerblow]

very nice and sophisticated.... Let's do it!

[zackertashia]

great worr..even easier for d members to recognize others..

[xtracooljustin]

mayb somebody can DIY first n c da response how?

most probably hav to use tin or aluminium...

[tyke]

aRRrgghh,i like the idea very much. :yahoo:
yup it will give the club tht particular distinguished look too! :ok:
i think mebbe i will go and try doing one for myself! :nyehehe:
shall keep y'all updated! ;)

[skar19]

i think it is possible to get it to fit on the grill or on the UDM plate, sure can find a way, hmmm it looks good, but must consider making it theft proof/resistant.

[jarance]

nice. give it a VIP look... will try to diy this weekend... ha..ha..

[willie]

Originally posted by skar19@May 27 2005, 04:05 AM
i think it is possible to get it to fit on the grill or on the UDM plate, sure can find a way, hmmm it looks good, but must consider making it theft proof/resistant.
i though it is illegal to stick things on the number plate???

[aRRrgghh]

tot of having this as an alternative to the club sticker eh.. yup.. let's DIY first and see how it looks.. Mr Jarance.. the DIY master kekekek ..

[Jules]

Originally posted by willie+May 27 2005, 08:15 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (willie @ May 27 2005, 08:15 AM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-skar19@May 27 2005, 04:05 AM
i think it is possible to get it to fit on the grill or on the UDM plate, sure can find a way, hmmm it looks good, but must consider making it theft proof/resistant.
i though it is illegal to stick things on the number plate??? [/b][/quote]
willie,

It wun be illegal cos it's not on the number plate. as long as it's not lewd in meaning/representation or pose a safety hazard ( ie sharp edges ) - the authorities will not be able to stop it. I do not see putting on our club emblem an issue here - AFAIK.

Nice idea but one side is enugh.

[Daredevil]

Please do not use the bmwclub emblem without the committee's consent. You can DIY to see how it looks on your ride but it cannot be official until we seek clearance from the International Club Council. There has been lots of great suggestion but there are rules and protocols to whatever we do.

Thank you. :wink:

[jarance]

oops, prez say cannot diy.... aiyaa.. I have cut the plate.. :cry:

[rezzy3181]

Originally posted by jarance@May 27 2005, 12:44 PM
oops, prez say cannot diy.... aiyaa.. I have cut the plate.. :cry:
:cry: hold on friends until registered I had many clubs I join if to put on car no air run from my grille so now kept in showcase aja but nice to have once approved I used to get it for members at around RM25 if not wrong, have to charge and base on copper will be good no rust.

[MeanStreak]

Originally posted by rezzy3181@May 27 2005, 01:23 PM
base on copper will be good no rust.
aluminium pun don't rust wan... lagi murah :D ... tapi Pres sudah cakap tak boleh worrr... tunggulah sampai dapat approval... :lazy:

[aRRrgghh]

ooppss.. :o

[Daredevil]

Itu lah pasal nak jadi official club. We can't do whatever we want and whenever we want especially when it comes to official club merchandise. Not trying to be difficult but I guess somebody has to state the 'do's and don'ts, right? :P

Meanwhile, pls keep the suggestions coming in. The moment the club becomes official, we'll definitely need to execute some of these ideas.

[tyke]

daredevil,
while we r on subject of keeping the suggestions in,how about an official bmwclub polo tee?
tht would b nice dont u think?
cant wait for the approval from ROS! :yahoo:

[KiNaKa]

a very good idea on the grille emblem but i think the emblem

should put something bout the members maybe Member number

or watsoever so that it will not easily got stolen....

just my 2 cents...

[AnGeLiCdEmOn108]

Originally posted by KiNaKa@May 27 2005, 09:18 AM
a very good idea on the grille emblem but i think the emblem

should put something bout the members maybe Member number

or watsoever so that it will not easily got stolen....

just my 2 cents...
good idea i guess... emblem with members number in it... hopefully the emblem looks different from the rest... when i was in kl in april, every car had some kind of emblem on the number plate... mmm wonder why?

[Jules]

emblem, sticker etc etc ON NUMBER PLATE is ILLEGAL, even if its AAM or Dato/MP emblems - at least this is what I know...

[kevster30]

Please be advised

It is commendable and wonderful to see members taking the initiative to create premuim items to further fortify the club's image.

I think that there is some confusion here so let me try to clear the air.

As I have mentioned contless times, this club belongs to it's members and hence the driving force SHOULD be it's members.

After deliberations within the committee, here's the guideline:

1. It is encouraged for members to create premuim items that will boost the image of the club and it's members.

2. All premuims that are designed/devised MUST be approved by the committee to assure compliance to official guidelines.

3. A prototype/sample should be produced for deliberation within the committee.

I hope that this clears the air on this matter.

Unker Jarance, go ahead and make the prototype, I for one would like to see how it turns out. The samples that I have seen abroad are usually aluminium or brass based and the design etched onto it's surface and then enamel coated (just like our BMW logo on our rides.) Have fun!

[aRRrgghh]

:yahoo: yuupp.. u heard da mann.. unkel jarance w8 no more! :D

[jarance]

like to but got work this month and next... So somebody takes over the project.. Sorry ... :ok:

[mctnesh]

Originally posted by jarance@May 30 2005, 11:13 AM
like to but got work this month and next... So somebody takes over the project.. Sorry ... :ok:
but ..but...you're our expert DIY king lar :yes: :yes:

[MeanStreak]

Originally posted by mctnesh+Jun 1 2005, 04:36 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (mctnesh @ Jun 1 2005, 04:36 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-jarance@May 30 2005, 11:13 AM
like to but got work this month and next... So somebody takes over the project.. Sorry ... :ok:
but ..but...you're our expert DIY king lar :yes: :yes: [/b][/quote]
He busy DIY street lights lah!! :P

[jarance]

Originally posted by MTek1318+Jun 2 2005, 01:11 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (MTek1318 @ Jun 2 2005, 01:11 PM)</td></tr><tr><td id='QUOTE'> Originally posted by mctnesh@Jun 1 2005, 04:36 PM
<!--QuoteBegin-jarance@May 30 2005, 11:13 AM
like to but got work this month and next... So somebody takes over the project.. Sorry ... :ok:
but ..but...you're our expert DIY king lar :yes: :yes:
He busy DIY street lights lah!! :P [/b][/quote]
very farnee.. you guys... :aggressive:

[M3PHISTO]

Is this item availabel?

[tyke]

Originally posted by M3PHISTO@Feb 28 2006, 04:25 AM
Is this item availabel?
if only it was dude....but i guess it might be in the pipeline...

[M3PHISTO]

Originally posted by tyke+Feb 28 2006, 05:28 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (tyke @ Feb 28 2006, 05:28 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-M3PHISTO@Feb 28 2006, 04:25 AM
Is this item availabel?
if only it was dude....but i guess it might be in the pipeline... [/b][/quote]
Good to hear.

[E46 2.2]

Hehehehe..Pls dont forget about Us in East Malaysia ok

[3er]

Where the hell is that?? :)

[iCe]

Originally posted by 3er@Mar 2 2006, 04:24 PM
Where the hell is that?? :)
u mean where is East Malaysia?

[paksu]

Hello all,
What happen to idea to design the club emblem? I agree with that cos we will be looking more prestigious like VIP with it.... ;) err let me know if members still interested cos i can ask my fren help ! he good in designing this kind of logo etc... may be we just belanja him a glass of teh tarik with roti canai...

[burn]

VIP with driver... lagi prestigious!!! sticker cukuplah...
ingat kata kata DPM... change lifestyle!!!

[aRRrgghh]

Originally posted by paksu@Mar 23 2006, 08:13 AM
Hello all,
What happen to idea to design the club emblem? I agree with that cos we will be looking more prestigious like VIP with it.... ;) err let me know if members still interested cos i can ask my fren help ! he good in designing this kind of logo etc... may be we just belanja him a glass of teh tarik with roti canai...
Paksu, there's no problem designing it. We already have the Club logo. The only problem is to produce a good metal or any other good material with a mechanism that can be screwed behind. Just like the ACS front grill badge.

Have asked around. No luck yet. Do tell us if ur friend can do it. B)

[Daredevil]

It's a 'NO GO' for now.

REMINDER : This will only remain at conceptualization stage until the committee deliberate on this matter further.

TQ.

[paksu]

Originally posted by aRRrgghh+Mar 27 2006, 05:23 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (aRRrgghh @ Mar 27 2006, 05:23 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-paksu@Mar 23 2006, 08:13 AM
Hello all,
What happen to idea to design the club emblem? I agree with that cos we will be looking more prestigious like VIP with it.... ;) err let me know if members still interested cos i can ask my fren help ! he good in designing this kind of logo etc... may be we just belanja him a glass of teh tarik with roti canai...
Paksu, there's no problem designing it. We already have the Club logo. The only problem is to produce a good metal or any other good material with a mechanism that can be screwed behind. Just like the ACS front grill badge.

Have asked around. No luck yet. Do tell us if ur friend can do it. B) [/b][/quote]
ok i will try ask my fren to design it first then to show to members for the opinion b4 we go futher! but e46 where to put ahh? may be at side of plate number...... then we can belagak as a Dun melawat kawasan already.... :yahoo: nak jadi dun memang tak boleh jadi maa...

[aRRrgghh]

Originally posted by Daredevil@Mar 27 2006, 05:18 AM
It's a 'NO GO' for now.

REMINDER : This will only remain at conceptualization stage until the committee deliberate on this matter further.

TQ.
Roger that Mr Prezz.. :ok:

[Daredevil]

Originally posted by aRRrgghh+Mar 27 2006, 10:00 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (aRRrgghh @ Mar 27 2006, 10:00 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Daredevil@Mar 27 2006, 05:18 AM
It's a 'NO GO' for now.

REMINDER : This will only remain at conceptualization stage until the committee deliberate on this matter further.

TQ.
Roger that Mr Prezz.. :ok: [/b][/quote]
Appreciate that sir. TQ. ;)

[E46 2.2]

Sabah & Sarawak East Malaysia..Count us in